EnergiCCAATS Posted January 22, 2015 at 05:16 PM Report Share Posted January 22, 2015 at 05:16 PM Is there no way to display the tire PSI readings from the TPMS sensors which I know these tires have? I could find no where to enable this in any of the display settings. Quote Link to comment Share on other sites More sharing options...
murphy Posted January 22, 2015 at 07:34 PM Report Share Posted January 22, 2015 at 07:34 PM Is there no way to display the tire PSI readings from the TPMS sensors which I know these tires have? I could find no where to enable this in any of the display settings.It is not provided. It can be done with the Forscan computer program and a bluetooth OBD II scanner. Quote Link to comment Share on other sites More sharing options...
chancelperry Posted May 28, 2016 at 11:11 PM Report Share Posted May 28, 2016 at 11:11 PM It is not provided. It can be done with the Forscan computer program and a bluetooth OBD II scanner.It cannot be done on the hybrid/energi trims. Just tried this last night. Check here: http://www.2gfusions.net/showthread.php?tid=4320 Quote Link to comment Share on other sites More sharing options...
murphy Posted May 28, 2016 at 11:27 PM Report Share Posted May 28, 2016 at 11:27 PM It cannot be done on the hybrid/energi trims. Just tried this last night. Check here: http://www.2gfusions.net/showthread.php?tid=4320I did it on my 2013 Fusion Energi but I don't know what I was thinking when I wrote the previous post. I have a ScanGauge II in the car and entered four X-gauges to display the tire pressures. I used Forscan to turn on my DRLs. Quote Link to comment Share on other sites More sharing options...
chancelperry Posted May 28, 2016 at 11:40 PM Report Share Posted May 28, 2016 at 11:40 PM I did it on my 2013 Fusion Energi but I don't know what I was thinking when I wrote the previous post. I have a ScanGauge II in the car and entered four X-gauges to display the tire pressures. I used Forscan to turn on my DRLs.So you can only see the pressures on an external display with a scan tool? Or you can scroll through the instrument cluster and it reads out each individual pressure? Quote Link to comment Share on other sites More sharing options...
murphy Posted May 29, 2016 at 12:38 AM Report Share Posted May 29, 2016 at 12:38 AM So you can only see the pressures on an external display with a scan tool? Or you can scroll through the instrument cluster and it reads out each individual pressure?I only see the pressures on the ScanGauge II. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.