Jump to content
Ford Fusion Energi Forum

Enlighten and empower displays show zero bars, engage shows zl one?


Recommended Posts

This morning, while the vehicle was still warming up the ice, the vehicle showed zero bars in both the empower and enlighten displays. However my foot was on the accelerator and the vehicle was at least maintaining speed so I switched over to engage which showed one bar of white.

 

At about 1.8 bars of white (power from the ice) all three displays show 1.8 bars.

 

Does anyone else experience this? You'll likely need the ice still warming up for it to run at only 1 bar on the engage display. I've also had issues with the empower display not updating or lagging behind when the ice shuts off.

Edited by openair
Link to comment
Share on other sites

There seems to be varying or no correlation between the empower and engage displays. Sometimes empower shows more bars. Sometimes engage does. Sometimes empower grows from 1 to almost 2 bars before engage moves from one bar. Approaching 3 or greater bars they seem to converge. If running like a hybrid and the battery is low the empower display shows more bars than the engage display and vice versa if the battery is discharging or maintaining.

Edited by openair
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...