Jump to content
Ford Fusion Energi Forum

Lane Keeping Asst


Hardp
 Share

Recommended Posts

How do you even get it to stay on?  I know - RTFM...  I have to remember to activate each time.

We wern't talking about turning lane assist on.  That is a manual operation each time the car is turned on.

 

We were talking about whether there should just be a warning or a warning + steering assist.  That is what should stay the way it was set in the menu.

Link to comment
Share on other sites

Ok. Here's what I've figured out re LKA...so far.

 

When ONLY MyKey is present, regardless of the mode selected (and there are ony two choices, Aid Only or Aid + Alert), each time you re-start the Vehicle it defaults to Aid Only.

 

If the Admin key is present, you get THREE mode choices: Aid Only, Alert Only and Aid+Alert. If you select Aid +Alert mode and turn the car off, then the next time you start the Vehicle, IF theAdmin key is present, it "remembers" the Aid + Alert mode...BUT if only My Key is present, it defaults to Aid Only mode.

 

That makes no sense.

 

Thoughts? Ideas? Suggestions?

Link to comment
Share on other sites

The MyKey settings are programmed using the Admin key.  MyKey users cannot override the settings that were made via the Admin Key.  I would try programming the optional settings the way you want as described in the manual on page 48 using the admin key. I'm not sure if it will remember the settings for LKA. But I would not expect the LKA settings you mentioned above to be restricted options that require admin privileges. 

Edited by larryh
Link to comment
Share on other sites

  • 3 months later...

I'm a new owner (one month today)...I have a question, and my dealer is still researching the answer.  I used to be able to see the Lane Changing Assist visual on my screen (car with lanes...green until you cross the lane then turns red)...now it seems as if I do not have it enabled.  I have gone through the settings and can't seem to find HOW to active - I have changed the settings to Aid Only, Alert Only, and Aid & Alert, but nothing seems to display the visual. Could someone please let me know.  I'm sure it has an obvious ON/OFF, but I am going crazy trying to find it!  Much appreciated.  I have the 2014 Fusion Energi Itanium, and LOVE IT!

Link to comment
Share on other sites

I'm a new owner (one month today)...I have a question, and my dealer is still researching the answer.  I used to be able to see the Lane Changing Assist visual on my screen (car with lanes...green until you cross the lane then turns red)...now it seems as if I do not have it enabled.  I have gone through the settings and can't seem to find HOW to active - I have changed the settings to Aid Only, Alert Only, and Aid & Alert, but nothing seems to display the visual. Could someone please let me know.  I'm sure it has an obvious ON/OFF, but I am going crazy trying to find it!  Much appreciated.  I have the 2014 Fusion Energi Itanium, and LOVE IT!

 

The settings are in the menu options as noted above, but to turn on/off push in on the turn signal stalk... have you done that? 

Link to comment
Share on other sites

When you turn the car off Lane Keeping Assist turns off.  You have to turn it on, if you want to use it, each time you drive.  At the end of the turn signal stalk is the on/off button.

 

One thing to be aware of is that it is ease to inadvertently turn LKA on/off when you use your turn signals as you're driving.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...