SteveEnergi Posted March 14, 2014 at 12:10 PM Report Share Posted March 14, 2014 at 12:10 PM Has anyone gotten this to work? I can only get the 1st two beeps while holding down the door button, but never the 3rd button when pressing the "lock" button on the remote. Page 135 of the manual. Linking a Pre-Set Position to yourRemote Control or Intelligent Access Key Your vehicle can save the pre-set memorypositions for up to three remote controlsor intelligent access (IA) keys.1. With the ignition on, move the memorypositions to the desired positions.2. Press and hold the desired pre-setbutton for about five seconds. A chimewill sound after about two seconds.Continue holding until a second chimeis heard.3. Within three seconds, press the lockbutton on the remote control you arelinking. A single chime will sound. Thanks,Steve FusionEnergi 1 Quote Link to comment Share on other sites More sharing options...
murphy Posted March 14, 2014 at 12:19 PM Report Share Posted March 14, 2014 at 12:19 PM It worked fine for me. I have remotes configured to all three buttons. I also have three different door keypad codes configured.Did you enable easy entry/exit in the left screen? Quote Link to comment Share on other sites More sharing options...
SteveEnergi Posted March 14, 2014 at 07:14 PM Author Report Share Posted March 14, 2014 at 07:14 PM Yes, easy entry/exit is enabled. Everything seems to be working properly except for trying to get the remote programmed. Was there any trick? After the 2nd beep, I've kept the door button 1 pressed and pressed and held the "lock" button on the remote for about 30 seconds...nothing.After the 2nd beep, I've kept the door button 1 pressed and pressed and released the "lock" button on the remote...nothing.After the 2nd beep, I released the door button 1 and pressed and held the "lock" button on the remote for about 30 seconds...nothing.After the 2nd beep, I released the door button 1 and pressed released the "lock" button on the remote...nothing. Never a 3rd beep Quote Link to comment Share on other sites More sharing options...
murphy Posted March 14, 2014 at 08:10 PM Report Share Posted March 14, 2014 at 08:10 PM I just tried it. I do not get the third beep but my auto seat movement works.Have you checked to see if the seat moves back when the car is turned off? Quote Link to comment Share on other sites More sharing options...
Hybridbear Posted October 12, 2014 at 10:26 PM Report Share Posted October 12, 2014 at 10:26 PM I recently programmed this feature. No 3rd beep, but the key does move the seat. Now I just need to get the TSB applied to fix the issue so that it'll work when just opening the car with the key in proximity. Quote Link to comment Share on other sites More sharing options...
shaggy314 Posted October 20, 2014 at 06:53 PM Report Share Posted October 20, 2014 at 06:53 PM I tried to be cute and have button 3 be the door and 1 be the light on the opener. All I ever got to work is the 1 & 3 both open the door. /shrug Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.