fadi89 Posted April 24, 2017 at 09:50 AM Report Share Posted April 24, 2017 at 09:50 AM Hello , I hope you can help me with my problem , coz no one can :( , I have Ford fusion energi 2013 , I had a wrench pop up on my screen with the airbag light, I took it to a technical and he found the p2127 , and he cleand the Throttle , after one week the issue come back again , I took it to another technican and he used Ford IDC software and followed the steps , he check the pedal sensor cables and every cable , reset the PCM , and the issue was still there , then he replaced the pedal , the same issue ,replaced the Throttle , same issue! , Even replaced the PCM it self , same issue ! , also the same issue , finaly after 3 days he found water on the cable that connect all the car computer under the steering wheel ( I forget what they call it ) , and reset the PCM then every thing worked smoothly, the issue is after I took the car , I felt that it has a bad acceleration and bad fuel efficiency , I usually drive for 150 km to work and I used to get an avarege between 4.5 to 4.7 L/100km every day without charging the car , but aftar I took the car from the repair shop , the same trip with the same driving style , took around 5.5 to 5.7 L/100 Km , and I feel that the car is struggling to accelerate , I took it to the 3 different technicans and all of them confirmed that there is nothing wrong with the car , and all the readings are perfect , but I know my car and I know something is wrong , please help me and what to do , what should I check ?? , Could be the PCM resetting the PCM cause this ? And how many miles should I drive to relearn the PCM , coz I already drove more than 1000 Km and nothing happens :((( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.